Tyan B5211G20V4H Specifications download pdf (Page 24)

2.0.4 Precautions

Components and electronic circuit boards can be damaged by

discharges of static electricity. Working on a system that is

connected to a power supply can be extremely dangerous. Follow

the guidelines below to avoid damage to the Tank GT20 B5211 or

injury to yourself.

z Ground yourself properly before removing the top cover of the

system. Unplug the power from the power supply and then

touch a safely grounded object to release static charge (i.e.

power supply case). If available, wear a grounded wrist strap.

Alternatively, discharge any static electricity by touching the

bare metal chassis of the unit case, or the bare metal body of

any other grounded appliance.

z Avoid touching motherboard components, IC chips, connectors,

memory modules, and leads.

z The motherboard is pre-installed in the system. When

removing the motherboard, always place it on a grounded

anti-static surface until you are ready to reinstall it.

z Hold electronic circuit boards by the edges only. Do not touch

the components on the board unless it is necessary to do so.

Do not flex or stress circuit boards.

z Leave all components inside the static-proof packaging that

they ship with until they are ready for installation.

z After replacing optional devices, make sure all screws, springs,

or other small parts are in place and are not left loose inside

the case. Metallic parts or metal flakes can cause electrical

shorts.

Notes:

z All connectors are keyed to only attach one way.

z Always use the correct screw size as indicated in the

procedures.

Chapter 2: Setting Up

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 72 73

No comments

Tyan B5211G20V4H Specifications Page 24