Tyan S5397WAG2NRF Datasheet download pdf (Page 38)

http://www.tyan.com

3.1.3 In Case of Problems

If you have trouble booting your computer after making and saving the changes with

the BIOS setup program, you can restart the computer by holding the power button

down until the computer shuts off (usually within 4 seconds); resetting by pressing

CTRL-ALT-DEL; or clearing the CMOS.

The best advice is to only alter settings that you thoroughly understand. In particular,

do not change settings in the Chipset section unless you are absolutely sure of what

you are doing. The Chipset defaults have been carefully chosen either by TYAN or

your system manufacturer for best performance and reliability. Even a seemingly

small change to the Chipset setup options may cause the system to become

unstable or unusable.

3.1.4 Setup Variations

Not all systems have the same BIOS setup layout or options. While the basic look

and function of the BIOS setup remains more or less the same for most systems,

the appearance of your Setup screen may differ from the charts shown in this

section. Each system design and chipset combination requires a custom

configuration. In addition, the final appearance of the Setup program depends on

the system designer. Your system designer may decide that certain items should

not be available for user configuration, and remove them from the BIOS setup

program.

NOTE: The following pages provide the details of BIOS menu. Please be noticed

that the BIOS menu are continually changing due to the BIOS updating. The BIOS

menu provided are the most updated ones when this manual is written. Please visit

TYAN’s website at http://www.tyan.com

for the information of BIOS updating.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 79 80

No comments

Tyan S5397WAG2NRF Datasheet Page 38